This Block DockTM soap dish is made from aluminium and is powder-coated in hardwearing, long-lasting gorgeous ever-so-slightly-textured teal paint.

It’s light as a feather so great for taking on the road, across the sea or up in the air. Including the suction cup, this Block DockTM weighs less than 30 grams! For an uplifting pop of colour, this teal is the real deal. It will also stand out in your hotel bathroom so you don't forget it when travelling!

The Original Block Dock

Perfect for fitting 1 bar. This Block DockTM vertical soap dish is Wide in size. It is 8.45cm wide, 5.6cm tall and 4.35cm deep. It fits bars up to 4cm in depth – the shortest side of your bar. It’s a good fit for Ethique Shampoo and Bodywash bars, SimpleNakedSoap bars, Fair + Square Soapery bars, Dr Bronner’s, Solibar hair bars and all other wide bars and it holds all slim ones safely. If your bar is extra wide, long or heavy it’s easier to use and lasts longer if cut in two.

The Super Wide Block Dock

This Block Dock^TM is SUPERWIDE size yet weighs just 32 grams! It is 9.7cm wide, 6.5cm tall and 5.7cm deep. She fits bars up to 5.5cm in depth – the shortest side of your bar. Place your bar at the front of the Block Dock when new, let it lean to the back as it changes size and shape with use.

A suction cup comes with each Block DockTM soap dish to enable wall mounting. It WILL adhere to glass, acrylic, vitreous china, steel, most smooth tiles, and mirror. It will NOT adhere to textured tiles, paint etc because the suction cup cannot form the vacuum it needs to work. Please be sure to read our tips for installation and care (link below) including solutions for suction cup unsucking!

With the Block DockTM vertical soap dish and shampoo bar with suction, your bathing and beauty routines will be better by the bar! And cleaning is quick and easy. Just give it a once over in the shower with your finger from time to time and you’re done. It doesn’t get simpler than that. Better to keep it out of the dishwasher – anyway, that takes much longer! The Block DockTMbonus is the time you save on cleaning the bathroom.

Here's What You Need to Know About Installation and Care [Must Read]

Each Block DockTM soap dish comes with a PVC suction cup. The Block DockTM soap dish stands upright on any flat surface and does its best no-mess work when side-mounted on smooth surfaces by suction.

It WILL adhere to glass, acrylic, vitreous china, steel, most smooth tiles, and mirror. It will NOT adhere to textured tiles, paint and other porous surfaces because the suction cup cannot form the vacuum it needs to work. If your glass has been coated with a water stain protectant, it may not suction there either.

LOCATION

Locate your Block DockTM soap dish outside of direct water spray to prolong the life of your bar. Use your bar straight onto your wet hair or body. It doesn’t need extra time underwater. Excess moisture will drain straight away when your bar is back in the Block DockTM.In basins and sinks it’s a good idea to suction it to the inside the bowl, though outside of the direct spray of the water. This keeps your surfaces clear and lessens cleaning time. Bonus!

INSTALLATION

Clean the surface you want the Block DockTM soap dish to adhere to (use isopropyl alcohol if water alone is not enough).
Wet the back of the suction cup with water and press hard on the centre ‘head’ where you want it to stay.
Slip your Block DockTM over the head, pulling it down to fit tight in the top of the keyhole.
Add your bar and you’re done!

If your suction isn’t strong straight away, or it stays for a while then falls, leave some time between each of the steps and see. Overnight is ideal.
If your bar is extra-long or especially heavy, cut it into pieces for use. If it’s not sitting comfortably at first, angle it with the top towards the back and the bottom towards the front of the Block DockTM.
When you want to change the location simply lift the small tag and the suction will break.

IF YOUR SURFACE WON’T STICK

Suction to the nearest glass surface or stand upright on a shelf.
Use the two multipurpose holes in the back of the Block DockTM soap dish to thread a cable tie (best option for a tight fit), stainless wire, twist tie or similar through. Then tie tight around the shower rail or other fixture.
Hang via a shower curtain hook or a loop through the keyhole and around a fitting.
Try a 3M wet/dry strip or 3M outdoor tape.If your surface allows it, install with flat-head screws.

CARE

When needed, wipe the Block DockTM clean with your finger while showering. Cloth dry completely from time to time.

If you have a Shower Dome be sure to give your bars some time in the fresh air outside the shower every few days. If your bar has gone soft it needs time out. The Block DockTM soap dish will adhere to the outside of your shower or stand on the flat in a ventilated area. Your bars will last much longer if you do this.

#LOWWASTELIVING